 |
||||
 |
 |
 |
 |
 |
 |
||||
The EXTENDIT 201 Power Outlet is designed to be the add-on remote outlet. It plugs directly into the power strip and mounts to the wall using one screw. The 201 must always be used in conjunction with one 200 Power Adapter Outlet and a Power Strip of any length. You can use as many additional 201 Power Outlets as desired, branching out from the 200 Power Adapter. The 201 resembles the 200 with the exception of not having prongs on the back. The back is flush allowing it to be easily mounted on any wall or flat surface.
The EXTENDIT Power Adapter Outlet is designed to tap electrical power from an existing outlet and channel the power to the EXTENDIT 201 Power Outlet via the Power Strip. The 200 Module plugs directly into an existing outlet. Because the adapter has a built-in duplex receptacle, you still have access to that particular outlet. The 200 resembles the 201 with the exception of having prongs on the back. For a typical installation, you will always need at least one 200 Power Adapter.
The EXTENDIT ES100 Modular Power Strip is manufactured in three different lengths: 4 feet, 6 feet and 8 feet long. For custom installations, the Power Strip can be easily cut with a hack saw to any desired length. Unlike other surface raceways where wire has to be fed, the EXTENDIT Power Strip has molded-in conductors, requiring no wiring. In addition, they are keyed to fit only one way so that correct polarity is always maintained.
The inside corner coupling will provide more flexibility to the Extendit System. It will enable installations within an inside corner. As with all EXTENDIT products, the inside corner is pre-wired and keyed to assure proper polarity is maintained.
The EXTENDIT outside corner coupling will provide more flexibility to Extendit System. It will enable installations around an outside corner. As with all EXTENDIT products, the outside corner coupling is pre-wired and keyed to assure proper polarity.
The EXTENDIT Powerstrip Straight Coupling will afford longer runs and custom configurations. It will enable the installer to combine various sizes of Powerstrips for larger runs and offer more flexibility by allowing the installer to connect custom or standard sized Powerstrips. The EXTENDIT connector is pre-wired and is keyed to assure correct polarity when installed.
